All it takes is stains, bubbles, coating coming loose, or even the paint peeling off for you to think that there is infiltration in the wall. But then, how to solve it? This type of problem can affect not only the walls but also the health of the residents of the residence. And let’s agree that it’s unpleasant to have leaks, dripping faucets, fittings such as Everflow Fittings for example infiltration in the bathroom, or leaking discharge valves.
Because of this, infiltration in the wall must be resolved immediately. And that’s why we prepared this article for you. Below you will understand everything you need to solve the problem. Good reading!
Infiltration in the wall: what are the causes
Among The Most Common Reasons, We Can Highlight The Following:
- Problems with the gutter and the way rainwater are directed
- Inadequate or poor drainage system
- Cracks in the walls
- Plumbing defects
- Inadequate floor trim
- Failure to waterproof slabs, foundations, floors, and other places
- Lack of ventilation in the home
- Air conditioning drain problems
Infiltration In The Wall: How To Solve It
The first step to solve the problem of how to seal the infiltration in the wall is to remove the painting, the spackling, and the deteriorated mortar. Then it would help if you did the wall cladding. Apply the most suitable waterproofing product for the location, and reapply the mortar, spackling compound, and paint.
Slabs With Poor Waterproofing
Slabs that lack protection are one of the main causes of infiltration problems. Water runs through when a structured slab does not receive the correct waterproofing treatment, causing infiltrations.
To solve this type of problem, it is necessary to carry out the waterproofing process:
Infiltration in the ceiling or wall: when this occurs, it is necessary to waterproof the external area.
Infiltration in the wall that comes from the ground: after breaking the floor and removing the plaster, the area must be waterproofed.
Infiltration that originates from the neighboring residence: in this case, it is not just you who must carry out a reform; your neighbor will also need to do it. In addition, it will also be necessary to waterproof the contact area.
Infiltration From Rain On The Outside
After a certain time, it is normal for cracks and fissures to appear on the walls, both internally and externally. This is common because of the rains, and the cracks call for infiltration when it occurs. As a result, the wall gets covered in mildew, stains, and blisters. To solve the problem, it is necessary to invite a plumber like Midwest Supply for example to treat the cracks and cracks correctly.
